333 research outputs found

    A fixed-time second order sliding mode observer for a class of nonlinear systems

    Get PDF
    This paper presents a second order fixed time sliding mode observer based on an extension of the super-twisting algorithm. This observer can be applied to a class of nonlinear system with a block-wise representation. The block structure provides a straightforward form to the application of the proposed second order sliding mode algorithm, yielding to finite-time convergence with a settling time independent to the system initial conditions. Finally, as numerical simulation example, the case of a linear induction motor is studied, exposing the efficiency and feasibility of the proposal

    Aquivion® PFSA-based spray-freeze dried composite materials with SiO2 and TiO2 as hybrid catalysts for the gas phase dehydration of ethanol to ethylene in mild conditions

    Get PDF
    Aquivion PFSA resin, a perfluorinated ion-exchange polymer, has been used as a heterogeneous strong acid catalyst for a range of reactions; however, the activity of this material is limited due to the extremely low surface area of the polymer. In this paper we described the one-step synthesis of Aquivion® PFSA-based hybrid materials using heterocoagulation and spray-freeze-drying of sols containing the precursor of the active phases. The intimated encapsulation of different nano-oxides, such as TiO2 and SiO2 in the superacid resin matrix was easily obtained using this technique and compared with similar catalysts prepared by the impregnation conventional route. The approach led to the preparation of porous micro-granules characterised by a high homogeneity in the phase distribution and high surface area. The prepared materials were active and selective for the gas phase dehydration of ethanol to ethylene in mild conditions. The increase of the porosity improved the activity of the composites, compared to the pure Aquivion® PFSA, and allowed to reduce the amount of the superacid resin. Moreover, the type of encapsulated oxide, TiO2 or SiO2, modified the improved performance of the catalysts, having TiO2 the higher efficiency for ethanol conversion and selectivity in ethylene at very low temperature

    Superacid resin-based heterogeneous catalysts for the selective acylation of 1,2-methylenedioxybenzene

    Get PDF
    In this work, we firstly report on the use of highly active and selective Aquivion superacid resins as heterogeneous catalysts for the acylation of 1,2-methylenedioxybenzene (MDB) with propionic anhydride (AP). The reaction was investigated and optimized using solvent-free conditions to selectively produce 3,4-methylenedioxypropiophenone (MDP1P), a key intermediate for the manufacture of active ingredients used in insecticide formulations with a volume of production of roughly 3000 t/y. Interestingly, Aquivion-based catalysts allows to work in mild reaction conditions (i. e. 80 °C), obtaining MDP1P yields as high as 44 % after only 1 h of reaction (selectivity 83 %). A detailed study of the AP reactivity demonstrated its tendency to promote oligomerization reactions that, as confirmed by ex-situ and in-situ FT-ATR analyses, caused the deactivation of the catalyst forming surficial carbonaceous residues. In this context, a fast oxidation of the resin surface organic residues using a diluted HNO3 (or H2O2) solution was proven to be an efficient method to regenerate the catalyst, which can be reused for several reaction cycles. The results obtained in preliminary scale-up tests were basically unaffected by the reaction volume (up to 800 mL), paving the way for possible future applications of the process

    Pd/Au based catalyst immobilization in polymeric nanofibrous membranes via electrospinning for the selective oxidation of 5-hydroxymethylfurfural

    Get PDF
    Innovative nanofibrous membranes based on Pd/Au catalysts immobilized via electrospinning onto different polymers were engineered and tested in the selective oxidation of 5- (hydroxymethyl)furfural in an aqueous phase. The type of polymer and the method used to insert the active phases in the membrane were demonstrated to have a significant effect on catalytic performance. The hydrophilicity and the glass transition temperature of the polymeric component are key factors for producing active and selective materials. Nylon-based membranes loaded with unsupported metal nanoparticles were demonstrated to be more efficient than polyacrylonitrilebased membranes, displaying good stability and leading to high yield in 2,5-furandicarboxylic acid. These results underline the promising potential of large-scale applications of electrospinning for the preparation of catalytic nanofibrous membranes to be used in processes for the conversion of renewable molecules

    Structure and dynamics of pentacene on SiO2: From monolayer to bulk structure

    Get PDF
    We have used confocal micro Raman spectroscopy, atomic force microscopy (AFM), and x-ray diffraction (XRD) to investigate pentacene films obtained by vacuum deposition on SiO2 substrates. These methods allow us to follow the evolution of lattice structure, vibrational dynamics, and crystal morphology during the growth from monolayer, to TF, and, finally, to bulk crystal. The Raman measurements, supported by the AFM and XRD data, indicate that the film morphology depends on the deposition rate. High deposition rates yield two-dimensional nucleation and quasi-layer-by-layer growth of the T-F form only. Low rates yield three-dimensional nucleation and growth, with phase mixing occurring in sufficiently thick films, where the T-F form is accompanied by the "high-temperature" bulk phase. Our general findings are consistent with those of previous work. However, the Raman measurements, supported by lattice dynamics calculations, provide additional insight into the nature of the TFs, showing that their characteristic spectra originate from a loss of dynamical correlation between adjacent layers

    Their Day in Court: Assessing Guilty Plea Rates Among Terrorists

    Get PDF
    Individuals who are charged for traditional crimes are substantially more likely to plead guilty than individuals who are charged under the same statutes but who are officially involved in terrorism (Smith & Damphousse, 1998). Relying on a structural–contextual theory framework, a quantitative analysis not only confirmed that terrorists plead guilty more often than traditional offenders but that the defendant’s age and number of counts in the indictment are important predictors. Directions for future research are suggested.Yeshttps://us.sagepub.com/en-us/nam/manuscript-submission-guideline
    • …
    corecore